cage code id 0LFK5 : sitemap :
Login
Call Us Today:
800.544.6643 (USA)
630.629.9440 (TEL)

Search Catalog
      GO   
 All Categories    Hose End Control Valves
All Categories > Carter Ground Fueling > Nozzles Related Accessories > Hose End Control Valves > Item # 60129-1 HECV  

Item # 60129-1 HECV, Hose End Control Valves


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The Carter Hose End Control Valves (HECV’s) provide pressure limitation at the outlet to protect the aircraft while refueling. Three different pressure settings are available to tailor the control system to the customer’s requirements. The resultant control pressure curve is flat with little “droop” in pressure up to 300 U.S. gpm. Downstream surge pressure generated as a result of a rapid rise in downstream pressure (aircraft valve closure) is limited to 75 psi.

Outlets are available to mate the HECV to any Carter or Thiem nozzle. Threaded inlet and outlet adapter fittings are also available for alternative installations away from a nozzle. A variety of inlet fittings are available to mate industry standard hose connections.




Unit of Measure: Imperial Metric Both

 Specifications   Features   Ordering Information   Operation   

Manufacturer

Carter Ground Fueling

Product Type

Nozzle Related Accessories

Type

Hose End Control Valves

Series

Model 60129-1

Technical Information

  • Nominal spring settings (maximum pres-sure limits will be 5 psi greater than spring) - 35, 45 & 55 psi available.
  • Surge pressure control - 75 psi maximum with 0.5 second valve closure minimum.
  • Lock Up Pressure - 10 psi maximum over spring setting.
  • Pressure Limitation - 5 psi over spring set-ting with inlet pressure up to 100 psi
  • Hysteresis (difference in pressure limits between increasing and decreasing flow rates) - pressure limits with decreasing flow rates will normally be slightly greater than for increasing flow rates.
  • Defueling possible through unit, however block out device required to maintain maximum flow. Use Carter Block Out Device 61656.
  • 61656 Block Out Device recommended if system secondary control valve is to be checked.
  • Basic Model

    For installation on Carter 60427, Whittaker F116/F117 or Avery Hardoll HU3000/HU4000Nozzles or for line mounted applications.

    Basic Configuration

    A - 40 Mesh Screen
    B - 60 Mesh Screen

    C - 100 Mesh Screen

    D - 2 1/2” BSPP Male straight outlet (40913)

    E - 2 1/2” NPT Female straight inlet (41914)

    F - Outlet adapter to mate Theim F116/F117 Nozzle (60435)

    N - 2 1/2” NPT Male straight outlet (40779)

    R - Inlet adapter to mate Flight Refueling disconnect (41600)

    T - Adapter flange to outlet to mate military nozzle inlet (60797)

    W - Inlet & outlet flanges to mate Whittaker F116 & F117 nozzles

    3 - Specifies 35 psi spring setting

    4 - Specifies 45 psi spring setting

    5 - Specifies 55 psi spring setting.

    The Male Adapter Required To Mate The Desired Inlet

    6 - Male adapter half (43046) to mate standard female quick disconnect (43108) & old style dry break QD (60672-1)
    7 - Male adapter half to mate 61154 Dry Break (44185)

    Inlet Thread Type & Size

    H - Inlet thread - 2 1/2" NPT
    K - Inlet thread - 2 1/2” BSPP

    L - Inlet thread - 3” NPT

    M - Inlet thread - 3” BSPP

    P - Inlet thread - 2” NPT


     MORE IMAGES 

    ·  Flow Characteristics

    ·  Envelope Dimensions

    ·  Options


    Contact Becker & Associates
              © 2011 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383