cage code id 0LFK5 : sitemap :
Login
Call Us Today:
800.544.6643 (USA)
630.629.9440 (TEL)

Search Catalog
      GO   
 All Categories    Series IV Power Rewind Reels for Inverted Installation
All Categories > Hannay Reels® > Petroleum Hose Reels > Series IV Power Rewind Reels for Inverted Installation > Item # IV 18-45-46  

Item # IV 18-45-46, Series IV Power Rewind Reels for Inverted Installation


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

To handle single 1-1/4" I.D. through 2" I.D. hose.
  • Chain and sprocket drive powered by an electric, hydraulic, or compressed air motor.
  • Comet brake, air caliper brake, standard.
  • 90° ball bearing swivel joint with 1-1/2" female NPT and 2" groove.
  • Optional 2" intervals also available.
  • Flanged riser with 1-1/2" female NPT threads.
  • Inlet, riser, hub assembly are steel.
  • Stainless steel, aluminum, at extra cost.
  • Pressures to 600 psi (41 bar).
  • Temperatures from -40° F to +175° F (-40° C to +79° C).
  • Consult factory for other pressures & temps.
Notes:
  1. Specifications subject to change.
  2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
  3. For Power Rewind - When ordering power rewind models, prefix model number with:
    A = Air Rewind–Supplied with control valve and hose.
    EP =Electric Rewind (2/3HP)–12v and 24v DC rewind supplied with non-explosion proof switch and solenoid.
    EPJ = Explosion Proof Electric Rewind (2/3 HP)–Supplied with explosion proof switch, solenoid, and junction box.
    HD = Hydraulic Rewind–Not supplied with control valve.
  4. For a detailed parts breakdown drawing, request ISO 103.
  5. Be sure to check dimensions and weights prior to ordering.
Notice: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.

When ordering with 2" inlet/outlet, place a “2” after IV. re: IV 220-39-40




Unit of Measure: Imperial Metric Both

 Specifications   Notes   Additional Information   

Manufacturer

Hannay Reels®

Product Type

Series IV Power Rewind Reels for Inverted Installation

Type

Power Rewind Reels for Inverted Installation

Series

Series IV

Hose Capacity of Reel - I.D. Hose 1 1/4", O.D. Hose 1.81"

250 ft

Hose Capacity of Reel - I.D. Hose 32mm, O.D. Hose 46mm

76 m

Hose Capacity of Reel - I.D. Hose 1 3/8", O.D. Hose 2"

190 ft

Hose Capacity of Reel - I.D. Hose 35mm, O.D. Hose 51mm

58 m

Hose Capacity of Reel - I.D. Hose 1 1/2", O.D. Hose 2.06"

190 ft

Hose Capacity of Reel - I.D. Hose 38mm, O.D. Hose 52mm

58 m

Hose Capacity of Reel - I.D. Hose 2", O.D. Hose 2.56"

95 ft

Hose Capacity of Reel - I.D. Hose 51mm, O.D. Hose 65mm

29 m

A - Reel Dimensions

16.25 Inch
413
mm

B - Reel Dimensions

9.5 Inch
241
mm

C - Reel Dimensions

15.5 Inch
394
mm

D - Reel Dimensions

39 Inch
991
mm

E - Reel Dimensions

51 Inch
1295
mm

F - Reel Dimensions

23.5 Inch
597
mm

G - Reel Dimensions

46.25 Inch
1175
mm

H - Reel Dimensions

23.75 Inch
603
mm

X - Reel Dimensions

14.25 Inch
362
mm

Y - Reel Dimensions

31.38 Inch
797
mm

Approx. Weight NET

290 lb
132
kg

Approx. Weight SHIP

310 lb
141
kg


 DOWNLOADS 

Guide-for-Series-IV-Inverted-Installations
(PDF, 248KB)


Contact Becker & Associates
          © 2011 Becker & Associates : 563 Commonwealth Dr | Suite 600 | East Dundee, Illinois 60118 | P: 630.629.9440 | F: 630.620.6383