Product Catalog  Search Catalog   By KeywordBy Item #         All Categories    HP Series Single-Stage Coalescer Housings All Categories > Facet International > Aviation Division > Coalescer Separators-Fifth Edition > ST-5 and SS-5 Series Separator Cartridges Qualified to API 1581, 5th Edition > HP Series Single-Stage Coalescer Housings > Item # HP-50   Item # HP-50 HP Series Single-Stage Coalescer Housings     Download PDF       Printable Page       Email This Page       Save To Favorites    HP Series Single-Stage Coalescer Housings Facet HP Series single-stage water coalescers, commonly referred to as repack or hay pack housings, are horizontal, cylindrically shaped housings designed to protect filtration systems from gross amounts of water and solid contaminants. Facet recommends using their wafer style repack coalescers since they allow the first two sections to be replaced when required. The third and successive sections require fewer changeouts since they may remain relatively free of solids. Coalescing first starts as the product enters the vessel. Due to the substantially reduced velocity, free water will fall out by gravity. While the product progresses through the mass packed media, further coalescing occurs by impingement of water droplets on the media. At the same time, solids tend to fall out as the liquid enters the housing at a reduced velocity, but are further removed by filtration as the flow continues through the mass media. All Facet HP Series single-stage water coalescer housings are built to ASME Code, Section VIII, with many standard and optional accessories available to facilitate individual installation requirements. Facet HP Series single-stage coalescers use wafer repacks to remove gross amounts of water and solids from fuel. They are available in several standard sizes to accommodate flows from 10 to 2000 gpm (38 to 7570 lpm). They provide protection to filtration systems from gross amounts of water and solids that are commonly carried through inbound transport pipelines. HP Series housings offer an option of using coalescer cartridges for more efficient solids separation and liquid-liquid water separation. Use of an adaptor kit permits returning to the use of repacks at any time. HP Series housings have no internal moving parts and are designed for easy servicing, thereby reducing maintenance costs. Each housing is manufactured with quality workmanship and materials to give long-lasting and dependable service. larger image larger image Unit of Measure: Imperial | Metric | Both   Specifications   Standard Design Features    Manufacturer Facet International Product Type Coalescer Housings Series HP Design Pressure at 250ºF 150 psi Closure Seal Buna-N Exterior Prime Coated Inlet Connection Type 150# RF (ANSI) Flanged Outlet Connection Type 150# RF (ANSI) Flanged All Other Connection Type 3000# NPT Female Coupling Housing Style Style A Flow Rate    26 gpm 98 lpm 3.48 cfm Housing Liquid Volume 18.2 gal 69 lit Shipping Weight 345 156 kg Inlet Connection Size 1 1/2 in 38 mm Outlet Connection Size 1 1/2 in 38 mm Vent and Relief Connection Size 1/2 in 13 mm Drain Connection Size 3/4 in 19 mm Level Gauge Connection Size 3/4 in 19 mm Level Control Connection Size 3/4 in 19 mm A 8 5/8 in 219 mm B 44 1/2 in 1130 mm C 35 1/2 in 902 mm D 7 in 178 mm E 48 1/2 in 1232 mm F 8 in 203 mm G 10 in 254 mm L 8 5/8 in 219 mm Options Internal epoxy coating Steel stands

Home | Online Catalog | Industrial Manufacturers | Aviation Manufacturers | Filter News | Direct Employment Independent Rep Opportunities | About Us | Contact Us