Item # pn-2342, Wafer Repack Single-Stage Coalescers on Becker & Associates

Product Catalog


All Categories > Facet International > Aviation Division > Single-Stage Coalescers > Wafer Repack Single-Stage Coalescers > Item # pn-2342


	Item # pn-2342 Wafer Repack Single-Stage Coalescers

Download PDF

Printable Page

Email This Page

Save To Favorites

Product Image - WAfer Repack Single-Stage Coalescers

larger image

Wafer Repack Single-Stage Coalescers
Facet wafer repacks, used with Facet HP Series single-stage coalescer housings, are excellent coalescers or strainers for fuel applications when gross solids (in excess of 0.5 ppm) and heavy water contamination conditions exist.

Heavy solids or certain types of solids tend to either blind off the surface of the repack media and/or compress only the first and second wafers to the point that they will no longer function as a coalescer. With Facet wafer repacks, only the first two wafers need to be replaced when required while the third and successive downstream wafers require fewer changeouts since they generally remain relatively free of solids.

In constructing wafer repacks Facet controls the media density by machine packing the excelsior between metal wheel type grids and hardware cloth, then securely tying each end with heavy metal wire to prevent deformation during operation. To assure a tight fit inside the housing and prevent bypass, the outside diameter of each repack is strategically sized to the inside diameter of the housing wall.

Facet HP Series single-stage coalescers installed with Facet excelsior wafer repacks will provide excellent protection to fueling systems when both gross solids and heavy water contamination conditions are present.

Unit of Measure: Imperial | Metric | Both

Specifications

Manufacturer		Facet International

Product Type		Coalescers

Used With		Facet HP series single-stage coalesers housings

Item # pn-2342 Wafer Repack Single-Stage Coalescers

Manufacturer

Product Type

Used With