Product Catalog  Search Catalog   By KeywordBy Item #         All Categories    HP Series Single-Stage Coalescer Housings All Categories > Facet International > Aviation Division > Single-Stage Coalescers > HP Series Single-Stage Coalescer Housings > View Items  HP Series Single-Stage Coalescer Housings Check up to five results to perform an action. larger image Facet HP Series single-stage water coalescers, commonly referred to as repack or hay pack housings, are horizontal, cylindrically shaped housings designed to protect filtration systems from gross amounts of water and solid contaminants. Facet recommends using their wafer style repack coalescers since they allow the first two sections to be replaced when required. The third and successive sections require fewer changeouts since they may remain relatively free of solids. Coalescing first starts as the product enters the vessel. Due to the substantially reduced velocity, free water will fall out by gravity. While the product progresses through the mass packed media, further coalescing occurs by impingement of water droplets on the media. At the same time, solids tend to fall out as the liquid enters the housing at a reduced velocity, but are further removed by filtration as the flow continues through the mass media. All Facet HP Series single-stage water coalescer housings are built to ASME Code, Section VIII, with many standard and optional accessories available to facilitate individual installation requirements. Facet HP Series single-stage coalescers use wafer repacks to remove gross amounts of water and solids from fuel. They are available in several standard sizes to accommodate flows from 10 to 2000 gpm (38 to 7570 lpm). They provide protection to filtration systems from gross amounts of water and solids that are commonly carried through inbound transport pipelines. HP Series housings offer an option of using coalescer cartridges for more efficient solids separation and liquid-liquid water separation. Use of an adaptor kit permits returning to the use of repacks at any time. HP Series housings have no internal moving parts and are designed for easy servicing, thereby reducing maintenance costs. Each housing is manufactured with quality workmanship and materials to give long-lasting and dependable service.     Download PDF       Printable Page       Email This Page       Save To Favorites      Results per Page :  25 50 100 200   Results 1 - 13 of 13 Unit of Measure: Imperial | Metric | Both  1  Item # Flow Rate Inlet Connection Size Outlet Connection Size Vent and Relief Connection Size Drain Connection Size HP-10 6 gpm 23 lpm 0.80 cfm 1 in 25 mm 1 in 25 mm 1/2 in 13 mm 1/2 in 13 mm HP-25 15 gpm 57 lpm 2.01 cfm 1 1/2 in 38 mm 1 1/2 in 38 mm 1/2 in 13 mm 1/2 in 13 mm HP-50 26 gpm 98 lpm 3.48 cfm 1 1/2 in 38 mm 1 1/2 in 38 mm 1/2 in 13 mm 3/4 in 19 mm HP-100 60 gpm 227 lpm 8.02 cfm 3 in 76 mm 3 in 76 mm 3/4 in 19 mm 3/4 in 19 mm HP-150 100 gpm 379 lpm 13.37 cfm 3 in 76 mm 3 in 76 mm 3/4 in 19 mm 3/4 in 19 mm HP-200 155 gpm 587 lpm 20.72 cfm 3 in 76 mm 3 in 76 mm 1 in 25 mm 1 in 25 mm HP-300 225 gpm 852 lpm 30.08 cfm 4 in 102 mm 4 in 102 mm 1 in 25 mm 1 1/2 in 38 mm HP-500 350 gpm 1325 lpm 46.79 cfm 6 in 152 mm 6 in 152 mm 1 in 25 mm 1 1/2 in 38 mm HP-750 510 gpm 1930 lpm 68.18 cfm 6 in 152 mm 6 in 152 mm 1 1/2 in 38 mm 2 in 51 mm HP-1000 720 gpm 2725 lpm 96.25 cfm 8 in 203 mm 8 in 203 mm 1 1/2 in 38 mm 2 in 51 mm HP- 1500 940 gpm 3558 lpm 125.66 cfm 8 in 203 mm 8 in 203 mm 1 1/2 in 38 mm 2 in 51 mm HP-1800 1200 gpm 4542 lpm 160.42 cfm 10 in 254 mm 10 in 254 mm 1 1/2 in 38 mm 2 in 51 mm HP-2000 1425 gpm 5394 lpm 190.49 cfm 10 in 254 mm 10 in 254 mm 1 1/2 in 38 mm 2 in 51 mm   Results 1 - 13 of 13 1

Home | Online Catalog | Industrial Manufacturers | Aviation Manufacturers | Filter News | Direct Employment Independent Rep Opportunities | About Us | Contact Us